I bought a no name pipe at the flea market today and want to change it up.
I am cutting down the bowl,rusticating it,and want to turn it black.
Which dye do I use for this?
Thanks.
Black Dye
- Mr Beardsley
- Founding Member
- Posts: 11465
- Joined: Mon Apr 23, 2018 12:16 am
This brand is what I see mentioned the most among pipe makers and restorers
https://www.fiebing.com/catalogue/dyes/
https://www.fiebing.com/catalogue/dyes/
“If you try to fail, and succeed, which have you done?” - George Carlin
- Houtenziel
- Codger in Training
- Posts: 3773
- Joined: Mon Aug 13, 2018 12:58 pm
Also of note, if you have a Tandy Leather in your city, they sell Fiebing's dye.Mr Beardsley wrote: ↑Sun Oct 14, 2018 12:57 pm This brand is what I see mentioned the most among pipe makers and restorers
https://www.fiebing.com/catalogue/dyes/
“To educate a person in the mind but not in morals is to educate a menace to society.”
― Theodore Roosevelt
― Theodore Roosevelt
- SidStavros
- Member in Good Standing
- Posts: 930
- Joined: Tue Jul 24, 2018 2:56 am
- Location: Athens-Greece
In ebay too
https://www.ebay.com/bhp/fiebings-leather-dye
https://www.ebay.com/bhp/fiebings-leather-dye
Blog for the New pipe smoker: http://Pipe-smoke.blogspot.gr
- Thelonious monkfish
- Codger in Training
- Posts: 2746
- Joined: Fri May 04, 2018 2:39 pm
I'll be the one to suggest using iron acetate. Cheap and easy to make. Plain white vinegar in a jar, add rusty stuff like nails/steel wool, wait a few days/week then it's ready to use. Adding tannins to the wood before applying will make it darker. Anything with tannins, black tea/black stain/etc. The acetate is a chemical reaction stain so it can only be removed/lightened by sanding it off. Good luck, put up pictures if you can.
- Mr Beardsley
- Founding Member
- Posts: 11465
- Joined: Mon Apr 23, 2018 12:16 am
I've seen this mentioned in a few places and it's intriguing enough that one day I'll probably try itThelonious monkfish wrote: ↑Tue Oct 16, 2018 4:51 pm I'll be the one to suggest using iron acetate. Cheap and easy to make. Plain white vinegar in a jar, add rusty stuff like nails/steel wool, wait a few days/week then it's ready to use. Adding tannins to the wood before applying will make it darker. Anything with tannins, black tea/black stain/etc. The acetate is a chemical reaction stain so it can only be removed/lightened by sanding it off. Good luck, put up pictures if you can.
“If you try to fail, and succeed, which have you done?” - George Carlin
- Thelonious monkfish
- Codger in Training
- Posts: 2746
- Joined: Fri May 04, 2018 2:39 pm
Yes, it will stain it black but the nature of briar to accept stain is going to prevent a saturated black look. If you just want it really dark it's fine but for a jet black finish iron acetate on top of black RIT works or you could mix up some shellac with black RIT and apply that.