MM Charles Towne Cobbler!

User avatar
CoreyR
Founding Member
Posts: 196
Joined: Sun Apr 22, 2018 9:55 pm
Location: Dinwiddie, Va

Tue May 07, 2019 7:28 am

Bruyere_Royale wrote:
Tue May 07, 2019 5:47 am
CoreyR wrote:
Mon May 06, 2019 7:15 am
Personally, I could care less if they are made by Guido in his garage in Hoboken just so long as they are well made and get the job done.
Why does it have to be a Guido from Jersey? :lol:
Because it was the first thing I could come up with, outa thin air??? :roll:
This post by CoreyR liked by:
Bruyere_Royale
User avatar
CoreyR
Founding Member
Posts: 196
Joined: Sun Apr 22, 2018 9:55 pm
Location: Dinwiddie, Va

Tue May 07, 2019 7:39 am

Ok, I can never get pictures to post on here so y'all will have to settle for descriptions. I have two of the PSF POYs and two Charlestown Cobbler MMs side by side. The CTs are both a bit longer than the PoYs. One is about 5mm longer at the bit, 4mm at the shank. The other is just over a cm longer on both. the bowls appear to have no more variation than a comparable set of CGs or any other set of "matched" cobs.
Now this is interesting, the stems are NOT interchangeable. I do not have my calipers with me and I am eyeballing everything or using a wooden ruler. The stems are close, very close but the CTs are just a hair too large for the PoYs and the PoYs are too loose to serve in the CTs. They look nearly identical other than the Pipe of the Years are somewhat darker. Just barely though. That could just be age maybe? No matter, they feel the same in my hand and seem to smoke the same. I'm good!! :thumbs:
This post by CoreyR liked by (total 2):
Mr BeardsleyPreacher1611
User avatar
arturo7
Active Member
Posts: 238
Joined: Tue Jun 26, 2018 10:37 pm
Location: way out west

Tue May 07, 2019 4:33 pm

Maybe the PoY used a different shank due to the custom logo?
ever forward
User avatar
CoreyR
Founding Member
Posts: 196
Joined: Sun Apr 22, 2018 9:55 pm
Location: Dinwiddie, Va

Tue May 07, 2019 8:12 pm

The "logo" is just printed on there. No big deal that i can see.
User avatar
CoreyR
Founding Member
Posts: 196
Joined: Sun Apr 22, 2018 9:55 pm
Location: Dinwiddie, Va

Thu May 09, 2019 9:54 am

Well, they smoke as good as the PSF PoYs!!
This post by CoreyR liked by (total 2):
Mr BeardsleyPreacher1611
User avatar
Preacher1611
Active Member
Posts: 418
Joined: Tue May 08, 2018 11:32 am
Location: Van Schaick Island, NY

Wed May 22, 2019 7:56 am

I'm a bit late to this thread... but I might just have to buy me one of these from MM. I like the looks of it!
Post Reply