What Are You Smoking? March 2023

[Fr_Tom]

Kendal Kentucky in an Altinok POY

[Fr_Tom]

OJK in an Altinok meer

[Fr_Tom]

OJK in a Westbrook pot

[Piping Abe]

Paul's Arrowhead in a Ser Jacopo and a Arnold Palmer.

If you come this way, bring that pipe. I want to look at how it's made/drilled.

Easy arrow straight drilling on that one. It's one piece made to look like two tied together. Look closely and you can visualize exactly where it's drilled. Even if they needed to change the angle of the draft drilling and keyhole it the band would cover the little bite in the end of the shank

I really don’t get how they drill the holes on these!

[Sheridan]

If you come this way, bring that pipe. I want to look at how it's made/drilled.

Easy arrow straight drilling on that one. It's one piece made to look like two tied together. Look closely and you can visualize exactly where it's drilled. Even if they needed to change the angle of the draft drilling and keyhole it the band would cover the little bite in the end of the shank

I really don’t get how they drill the holes on these!

They used to splice parts of the shank together years ago, probably got some newfangled technique nowadays.
Good afternoon.
Wind, rain & St. Bruno, in a Sasieni with a replacement stem.

[Fr_Tom]

Epiphany in a saddle-bit Silver Duke pot

[Fidibusz]

Henry the cat’s morning patrol with Haunted Bookshop in a Rossi Vittoria billiard and Pegasus in a Missouri Pride. Cloudy and 45 degrees.

[Piping Abe]

Finished the living room yesterday. Just got done cutting in the kitchen. Taking a break with some Oak Alley in a Dr. Grabow Sculptura shape 46

[Tsal]

If you come this way, bring that pipe. I want to look at how it's made/drilled.

Easy arrow straight drilling on that one. It's one piece made to look like two tied together. Look closely and you can visualize exactly where it's drilled. Even if they needed to change the angle of the draft drilling and keyhole it the band would cover the little bite in the end of the shank

I really don’t get how they drill the holes on these!

Straight through but the draft hole would be offset in the mortise side. Kinda like a Hungarian.

[Tsal]

Paul's Arrowhead in a Ser Jacopo and a Arnold Palmer.

If you come this way, bring that pipe. I want to look at how it's made/drilled.

Ok.